PB-45 Fault Code
Range:
Function:
0
*
[0 - 0] This buffer contains the alarm word for all alarms
and warnings that have occurred since last reset or
power-up. The buffer capacity is maximum 8 error
events.
PB-47 Fault Number
Range:
Function:
0
*
[0 - 0] This buffer contains the alarm word for all alarms
and warnings that have occurred since last reset or
power-up. The buffer capacity is maximum 8 error
events.
PB-52 Fault Situation Counter
Range:
Function:
0
*
[0 - 1000]
PB-53 Profibus Warning Word
Read only
Range:
Function:
0
*
[0 - 65535] This parameter shows PROFIBUS communication
warnings. Refer to the
AF-650 GP & AF-600 FP
PROFIBUS DP Operating Instructions, DET-624
for
further information.
Bit
Description
0
Connection with DP-master is not OK.
1
Not used.
2
NDL (Network data link layer) is not OK.
3
Clear data command received.
4
Actual value is not updated.
5
Baud rate search.
6
PROFIBUS ASIC is not transmitting.
7
Restore of PROFIBUS is not OK.
8
Frequency converter is tripped.
9
Internal CAN error.
10
Wrong configuration data from PLC.
11
Wrong ID sent by PLC.
12
Internal fault occurred.
13
Not configured.
14
Timeout active.
15
Warning 34, Fieldbus fault
active.
Table 3.14 PROFIBUS Warning Word
PB-63 Actual Baud Rate
Option:
Function:
This parameter shows the actual
PROFIBUS baud rate. The PROFIBUS
master automatically sets the baud
rate.
[0]
9,6 kbit/s
[1]
19,2 kbit/s
PB-63 Actual Baud Rate
Option:
Function:
[2]
93,75 kbit/s
[3]
187,5 kbit/s
[4]
500 kbit/s
[6]
1500 kbit/s
[7]
3000 kbit/s
[8]
6000 kbit/s
[9]
12000 kbit/s
[10]
31,25 kbit/s
[11]
45,45 kbit/s
[255]
*
No baudrate found
PB-64 Device Identification
Range:
Function:
0
*
[0 - 0]
PB-65 Profile Number
Range:
Function:
0
*
[0 - 0] This parameter contains the profile identification.
Byte 1 contains the profile number and byte 2 the
version number of the profile.
PB-67 Control Word 1
Range:
Function:
0
*
[0 - 65535]
PB-68 Status Word 1
Range:
Function:
0
*
[0 - 65535]
PB-70 Edit Set-up
This parameter is unique for keypad and fieldbus. See
Option:
Function:
Select the set-up to edit.
[0]
Factory setup Uses default data. This option can be used
as a data source to return the other set-ups
to a known state.
[1]
Set-up 1
Edits set-up 1.
[2]
Set-up 2
Edits set-up 2.
[3]
Set-up 3
Edits set-up 3.
[4]
Set-up 4
Edits set-up 4.
[9]
*
Active Set-up Follows the active set-up selected in
Parameter Description
100
03/2016 All rights reserved.
DET-620D
3
3
