GE Ecomagination AF-600 FP Programming Manual Download Page 109

Page: 109 / 239

3.15 LN-##

LonWorks

Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.

LN-00 Neuron ID

Range:

Function:

[0 - 0]

View the Neuron chip's unique Neuron ID number.

LN-10 Drive Profile

Option:

Function:

This parameter allows selecting between

LONMARK functional profiles.

[0]

VSD profile The GE Profile and the Node Object are

common for all profiles.

LN-15 LON Warning Word

Range:

Function:

[0 - 65535] This parameter contains the LON specific

warnings.

Bit

Status

Internal fault

Reserved

Changeable types

Initialisation error

Internal communication error

Software revision mismatch

Bus not active

Option not present

LON input (nvi/nci) exceeds limits

Table 3.16 LON Warning Word

LN-17 XIF Revision

Range:

Function:

[0 - 5] This parameter contains the version of the external

interface file on the Neuron C chip on the LON

option.

LN-18 LonWorks Revision

Range:

Function:

[0 - 5] This parameter contains the software version of the

application program on the Neuron C chip on the

LON option.

LN-21 Store Data Values

Option:

Function:

This parameter is used to activate storing of

data in the non-volatile memory.

[0]

Off

Store function is inactive.

[2]

Store all

setups

Stores all parameter values in the E

PROM.

The value returns to

Off

when all parameter

values have been stored.

Parameter Description

108

DET-620D

Summary of Contents for Ecomagination AF-600 FP















































































































































































































































Search results

Summary of Contents for Ecomagination AF-600 FP

Reviews:

Related manuals for Ecomagination AF-600 FP

Brands by name

Popular brands

GE Ecomagination AF-600 FP, Programming Manual

Search results

Summary of Contents for Ecomagination AF-600 FP

Reviews:

Related manuals for Ecomagination AF-600 FP

Brands by name

Popular brands