K-30 Unit for Custom Readout
Option:
Function:
[DR-09 Custom Readout]
in
parameter K-20 Display
Line 1.1 Small
to
parameter K-24 Display Line 3
Large
.
[0]
[1]
*
%
[5]
PPM
[10]
1/min
[11]
RPM
[12]
Pulse/s
[20]
l/s
[21]
l/min
[22]
l/h
[23]
m3/s
[24]
m3/min
[25]
m3/h
[30]
kg/s
[31]
kg/min
[32]
kg/h
[33]
t/min
[34]
t/h
[40]
m/s
[41]
m/min
[45]
m
[60]
°C
[70]
mbar
[71]
bar
[72]
Pa
[73]
kPa
[74]
m WG
[75]
mm Hg
[80]
kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125] ft3/s
[126] ft3/min
[127] ft3/h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in2
[172] in WG
[173] ft WG
[174] in Hg
[180] HP
K-31 Min Value of Custom Readout
Range:
Function:
0.00 Custom-
ReadoutUnit
*
[-999999.99 -
100.00
CustomRea-
doutUnit]
This parameter allows selection
of the minimum value of the
custom-defined readout
(occurs at zero speed). It is
only possible to select a value
different from 0 when selecting
a linear unit in
parameter K-30 Unit for Custom
. For quadratic and
cubic units the minimum value
is 0.
0.00 Custom-
ReadoutUnit
*
[-999999.99 -
100.00
CustomRea-
doutUnit]
K-32 Max Value of Custom Readout
Range:
Function:
100 Custom-
ReadoutUnit
*
[par. K-31 -
999999.99
CustomRea-
doutUnit]
This parameter sets the
maximum value to be shown
when the speed of the motor
has reached the set value for
or
(depends on
setting in
K-37 Display Text 1
Range:
Function:
0
*
[0 -
25]
In this parameter, it is possible to write an individual
text string to show in the keypad or to be read via
serial communication. To show the text permanently,
select
[37] Display Text 1
in 1 of the following
parameters:
•
Parameter K-20 Display Line 1.1 Small
.
•
Parameter K-21 Display Line 1.2 Small
.
•
Parameter K-22 Display Line 1.3 Small
•
Parameter K-23 Display Line 2 Large
•
Parameter K-24 Display Line 3 Large
.
•
.
Changing
parameter EN-08 Host Name
- but not vice versa.
Parameter Description
30
03/2016 All rights reserved.
DET-620D
3
3
