3.17 DR-##
Data
Readouts
3.17.1 DR-0# General Status
DR-00 Control Word
Range:
Function:
0
*
[0 - 65535] View the control word sent from the frequency
converter via the serial communication port in
hex code.
DR-01 Reference [Unit]
Range:
Function:
0 ReferenceFeed-
backUnit
*
[-999999 -
999999
ReferenceFeed-
backUnit]
View the present reference
value applied on impulse or
analog basis in the unit
resulting from the configu-
(Hz, Nm, or
RPM).
DR-02 Reference [%]
Range:
Function:
0 %
*
[-200 -
200 %]
View the total reference. The total reference
is the sum of digital, analog, preset, bus,
and freeze references, plus catch up and
slow down.
DR-03 Status Word
Range:
Function:
0
*
[0 - 65535] View the status word sent from the frequency
converter via the serial communication port in
hex code.
DR-05 Main Actual Value [%]
Range:
Function:
0 %
*
[-100 - 100 %] View the 2-byte word sent with the status
word to the fieldbus master reporting the
main actual value.
DR-09 Custom Readout
Range:
Function:
0 CustomRea-
doutUnit
*
[-999999.99 -
999999.99
CustomRea-
doutUnit]
View the user-defined readouts
as defined in
parameter K-30 Unit for Custom
, and
3.17.2 DR-1# Motor Status
DR-10 Power [kW]
Range:
Function:
0 kW
*
[0 -
10000
kW]
Shows motor power in kW. The value shown is
calculated based on the actual motor voltage
and motor current. The value is filtered, and
therefore approximately 1.3 s may pass from
when an input value changes to when the
data readout values change. The resolution of
readout value on fieldbus is in 10 W steps.
DR-11 Power [hp]
Range:
Function:
0 hp
*
[0 -
10000 hp]
View the motor power in hp. The value
shown is calculated based on the actual
motor voltage and motor current. The value is
filtered, and therefore approximately 1.3 ms
may pass from when an input value changes
to when the data readout values change.
DR-12 Motor Voltage
Range:
Function:
0 V
*
[0 - 6000 V] View the motor voltage, a calculated value
used for controlling the motor.
DR-13 Frequency
Range:
Function:
0 Hz
*
[0 - 6500 Hz] View the motor frequency, without
resonance damping.
DR-14 Motor current
Range:
Function:
0 A
*
[0 - 10000
A]
View the motor current measured as an
average value, I
RMS
. The value is filtered, and
thus approximately 1.3 s may pass from when
an input value changes to when the data
readout values change.
DR-15 Frequency [%]
Range:
Function:
0 %
*
[-100 -
100 %]
View a 2-byte word reporting the actual motor
frequency (without resonance damping) as a
percentage (scale 0000–4000 hex) of
parameter F-03 Max Output Frequency 1
. Set
parameter PB-16 PCD Read Configuration
index 1
to send it with the status word instead of the
MAV.
Parameter Description
AF-600 FP
™
Programming Guide
DET-620D
03/2016 All rights reserved.
115
3
3
