GCC Technologies AFJ-24S, User Manual

Page: 89 / 234

AFJ-24S User Manual
89
2. 4-Point Positioning
This is the basic mark pattern that AAS II will auto detect four registration marks and contour cut
images inside those marks.

Command: Esc.D1;(XDist);(YDist):

Layout: 4 registration marks at the 4 corners around the design
3. Segmental Positioning
In addition to 4 original points, the intermediate registration marks are added on both X axis and Y
axis to help contour cut accurately, especially for cutting large images.

Command: Esc.D2;(XDist);(YDist);(XStep);(YStep):

Layout:
In-between distance on X: 200~600mm, default 300mm
In-between distance on Y: 200-600mm, default 300mm

High Precision Long Picture Cutting