GCC Technologies AFJ-24S, User Manual

Page: 87 / 234

AFJ-24S User Manual
87
5.2 AAS Contour Cutting System
The AAS system has one calibration procedures to ensure maximum accuracy of AAS operation. To
operate the AAS you need to learn about the method of media feeding firstly. (Refer to
4.2 How to load
the sheet media into machine in P. 77 )
5.2.1 Notice for Registration Marks
The first registration mark is designed to be different in order to identify the origin for AAS
auto-detection. The following precaution must be aware for registration marks to be read
automatically.
▶
Type of media
▶
Registration mark pattern
▶
Reading range required for detection the registration marks
▶
Position for registration marks and medium
The registration marks have to be:
▶
Created by cutting software like GreatCut, SCAL, Illustrator Plug-In or CorelDRAW
plug-in, SignPal.
▶
Color: black color (printing quality of registration marks is essential; incorrect,
misaligned colors, blurry or smeared printout might leading to inaccurate cutting
result)
Length Thickness Margin
Range 5 ~ 50 mm 1 ~ 2 mm 0 ~ 50 mm
Optimized Setting 25 mm 1 mm 5 mm
The cutter cannot detect the marks while:
▶
Cutter carriage is not located near the outside area of first mark before detecting
(See the picture in page103 for auto-detecting area of first mark.)