GCC Technologies AFJ-24S, User Manual

Page: 92 / 234

AFJ-24S User Manual
92
5.3 Printer Test
Before performing AAS contour cutting, it’s recommended to print out a test file to make sure the
AAS II cutting accuracy. Please visit GCC website and go to Download Area to download the test
files.
https://www.gccworld.com/download.php?act=view&id=20
There are two testing files for AASII:
1. AAS II_X_Y_Offset_Caberation_A4 .eps (A4 size)
2. AAS II_X_Y_Offset_Caberation_600_600 .eps (Default setting, it is recommended for testing)
■
Print out the testing graphic. ( Please use high precision printer)
■
Load the graphic to RX II series and sent the file to test the cutting job
■
If there are any adjustments to be made, you can change the offset value by
following the steps:
▶
Measure the offset values from the printed line and the actual cutting line.
▶
Enter the AAS Offset under MISC function for the values you just measured,
then press Enter
▶
Test the cutting again
■
AAS II offset X and Y value is defined as following:
▶
Horizontal line is defined as X and vertical is defined as Y (when facing the