GCC Technologies AFJ-24S, User Manual

Page: 61 / 234

AFJ-24S User Manual
61
Blade Length Adjust
Select: OK: ENTER Set Length 0.00mm
Change: OK: ENTER
Test Blade Holder
OK: ENTER
Test Blade Length
OK: ENTER
Turn CW O Turn
N: ONLINE OK: ENTER
Adjustment completes
OK: ENTER
Ratio: 100%, 200%, 300%, 400%
Ratio Setting
Select: OK: ENTER
Pattern: Cross, Arrow
Pattern Setting
Select: OK: ENTER
3.3 Menu in Off-line Mode
Press [ON/OFF LINE] to switch to the offline mode
]
Offline For System Setup
Draft, Fair, Normal, Fine, Small Letter
Speed: 3~153 with an increment of 3 (cm/s)
[SPEED]
High, Medium, Low
move origin M
X Y
[ ]
[FORCE]
5~600 with an increment of 5(gram force)
[OFFSET]
[DATA CLEAR ]
Clear Data Memory
N: ONLINE OK: ENTER
Offset: 0.275 mm
OK: ENTER
0.000~1.000 with an increment of 0.025 (mm)
UP Speed: 3~153 with an increment of 3 (cm/s)
Force: 80 gf
OK: ENTER
UP Speed: 72 cm/s
Select: OK: ENTER
Up Accel.: Medium
Select: OK: ENTER
Quality: Normal
Select: OK: ENTER
AAS Speed: Medium
Select: OK: ENTER
Speed: 72 cm/s
Select: OK: ENTER
High, Medium, Low
Square Cut
Select: OK: ENTER
[CUT TEST]
Repeat AAS Job
Select: OK: ENTER
Redo Jobs in Memory
Select: OK: ENTER
Recut #1
Select: OK: ENTER
Copy #1
Select: OK: ENTER
Recut number: 0-99
Copy number: 1-999
After sending AAS job
Ratio: 100%
Change: OK: ENTER
Pattern: Arrow
Change: OK: ENTER