GCC Technologies AFJ-24S, User Manual

Page: 101 / 234

AFJ-24S User Manual
101
7.3 Cutting Plotter/Computer Communication Problems
The messages showed below present problems in relation to cutting plotter/computer communication.
Communication Error
Setup: MISC. key
Is the connection cable connected to
the cutting plotter and computer
properly?
Yes No
Has the interface setting been
done correctly? Refer to Chapter 2 -
Connecting your cutting
plotter.
Yes No
Try the communication between
your cutting plotter and computer.
If it still does not work, have your
cutting plotter serviced. Refer to the “ MISC ” key in Chapter
3 - Description of Operation for the
port setup.
If your cutting plotter cannot recognize the
HP-GL/2 or HP-GL commands, please check the
HP-GL/2 or HP-GL commands applied to your
cutting plotter are used properly.
Note:
The computer also needs to set up compatible communication
parameters to the cutting plotter set up.
HP-GL/2 Cmd. Error