Gateway ALR 9250R, User Manual

Page: 27 / 226

Chapter 1: Getting Started 13
2.
Verify that the system drawer power switch is in the OFF position.
3.
Connect controller and data cables to their respective devices as
appropriate (for example, SCSI cables to a storage drawer, or parallel
cables to a printer, etc.) See the illustration Connecting Peripherals
below.
Connecting Peripherals
4.
Connect the keyboard, mouse, and video cables to their respective
ports. Systems with multiple CPU drawers may require connecting
these cables to an autoswitcher unit. Refer to your rack system user’s
guide or “Connecting to an AutoSwitcher” on page 14 for the proper
connections.
5.
Connect the monitor power cable to an appropriate power source.
6. Verify that the voltage selector switches on the power supplies are set
for the proper voltage (115V or 230V).
7. Connect the system power cables to the power input connectors
8.
Connect the other end of the system power cables to the appropriate
power sources.
115V 115V
9250R_08
To printer
To power
source
CPU drawer
Mouse
Keyboard
To VGA
monitor or
autoswitcher
SCSI channel
Tape storage drawer
Keyboard and mouse tray
Keyboard
Mouse
9250R.book Page 13 Friday, April 9, 1999 9:44 AM