Gateway ALR 9250R, User Manual

Page: 24 / 226

10 Gateway ALR 9250R User’s Guide
8.
To secure the rear of the rail, slide the inner rails forward to gain
access to the mounting holes. The latch may lock the rail into place.
Release the latch to allow the rails to slide freely. To secure the front of
the rail, slide the inner rail so that the opening aligns with the
mounting holes. See the illustration Attaching the Cabinet Mounting
Rails below. Verify that the inner rails slide freely.
Attaching the Cabinet Mounting Rails
Mounting the CPU drawer in the cabinet
When the rails and the brackets are installed, you are ready to install the
drawer in the cabinet. Check the system specifications for the weight of the
drawer and use appropriate precautions when performing the installation.
1.
Pull the inner cabinet mounting rails (in the cabinet) all the way
forward until the retaining latches lock the rails in the “out” position.
To mount the drawer in the cabinet
9250R_05
Note:
The CPU drawer is heavy.
To prevent injury and
possible damage to the
equipment, we
recommended that you get
help when trying to mount
the drawer into the cabinet.
9250R.book Page 10 Friday, April 9, 1999 9:44 AM