Gateway ALR 9250R User Manual Download Page 120

Page: 120 / 226

106

Gateway ALR 9250R User’s Guide

From the boot menu, select the

Boot Device Priority

option.

Select the diskette drive as your primary boot device.

Save the settings and exit BIOS Setup. The server boots from the
diskette drive and displays a menu of options.

Follow the instructions in the menu to start the SSU.

When the SSU title appears on the screen, press

NTER

to continue.

10.

The mouse driver loads if it is available; press

NTER

to continue.

The message:

Please wait while the Application Framework loads....

appears.

When the main window of the SSU appears, you can customize the user
interface (UI) before continuing. See “Customizing the SSU” on page 107.

9250R.book Page 106 Friday, April 9, 1999 9:44 AM

Summary of Contents for ALR 9250R



































































































































































































































Search results

Summary of Contents for ALR 9250R

Reviews:

Related manuals for ALR 9250R

Brands by name

Popular brands

Gateway ALR 9250R, User Manual

Search results

Summary of Contents for ALR 9250R

Reviews:

Related manuals for ALR 9250R

Brands by name

Popular brands