Gateway ALR 9250R, User Manual

Page: 143 / 226

Chapter 6: Other Utilities 129
The three EMP access modes are disabled, pre-boot, and always active. You
can modify the operation mode by selections in the POST reset and POST
power-up dialogs. These are server control dialogs available with the EMP
Console.
EMP console requirements
This section outlines the requirements and configurations necessary for
using the EMP console.
Operating System, Windows NT:
•
Windows NT 4.0 or later
•
24 MB of RAM, 32 MB recommended
•
20 MB disk space
EMP Console Access Modes
(Server Configured for Console Redirect)
Mode Server is
powered off During POST After operating
system boots
Disabled Redirect window
appears, but is blank Redirect window Redirect window
Pre-boot EMP commands
available Redirect window Redirect window
Always Active EMP commands
available Redirect window EMP commands available
EMP Console Access Modes
(Server not Configured for Console Redirect)
Mode Server is
powered off During POST After operating
system boots
Disabled Redirect window
appears, but is blank Redirect window
appears, but is blank Redirect window
appears, but is blank
Pre-boot EMP commands
available EMP commands
available Redirect window
appears, but is blank
Always
Active EMP commands
available EMP commands
available EMP commands avail-
able
9250R.book Page 129 Friday, April 9, 1999 9:44 AM