Gates GC32FLEX Safety And Operation Manual Download Page 7 | Manualshive

Page: 7 / 62

background image

5

GC32FLEX/TSI SAFETY AND OPERATION MANUAL

CRIMPER SAFETY

WARNING

This Gates crimper has been engineered and qualified for Gates product ONLY. Crimping any NON-GATES

fluid power product, including miscellaneous items (cable/pipe) through the machine will not only VOID the

warranty but also breach the intended use and purpose of the machine and contravene basic regulations of

Work Safety and Prevention of accidents.

Intended use and purpose outlined in this manual also includes regular maintenance. Failure to use the

specified grease will also VOID Warranty.

Warranty and Liability

The terms and condition(s) of sale and delivery shall apply. A copy of these terms and condition can be

provided on request, but generally include conditions for intended use and purpose, improper procedure

concerning transport, storage & maintenance, unauthorized use, constructional changes or repairs and failure

to detect wear.

Only authorized/qualified electricians are allowed to work on the electrical system of Gates crimpers.

It is the responsibility of the operator to ensure that no oil from this crimper is allowed to seep into the

ground, in accordance with the pollution rules of the Water Resource Management Laws.

1. Avoid contact with oil for prolonged periods.
2. Keep workplace clear of objects and trip hazards.
3. Wear safety equipment at all times when operating the machine.
4. Keep body parts away from the machine when in use, do not put hands in crimper when operational.

«
...
5
6
7
8
9
...
»

Summary of Contents for GC32FLEX































































Reviews:

No comments

Related manuals for GC32FLEX

Pocket-Hole Jig 7pce

Brand: Triton Pages: 20

Brand: molex Pages: 6

Brand: PT Pages: 2

Brand: YATO Pages: 4

Brand: BorMann Pages: 6

Brand: 5th Axis Pages: 8

Brand: BEA Pages: 4

Brand: BEA Pages: 4

Brand: BEA Pages: 4

Brand: ReelCraft Pages: 5

Brand: ReelCraft Pages: 2

Brand: REED Pages: 2

Brand: gerardi Pages: 28

Brand: gerardi Pages: 36

Brand: SCHUNK Pages: 32

Brand: inventiv Pages: 48

Brand: MSW Motor Technics Pages: 5

Brand: TRI tool Pages: 95

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands