Gates GC32FLEX Safety And Operation Manual Download Page 6

Page: 6 / 62

GC32FLEX/TSI SAFETY AND OPERATION MANUAL

CRIMPER SAFETY

WARNING

This

Safety & Operation Manua

l is provided for your safety and the safety of others.

Every operator MUST

have completed training and have an understanding of the crimper and the requirements of hose assemblies

before using this machine.

It is the responsibility of the owner of this crimper to ensure that ONLY persons who have an understanding

of the local regulations for work safety and accident prevention in addition to having undertaken training on

using this crimper be allowed to operate this machine.

It is the responsibility of the operator of this crimper to observe the rules and guidelines set out in this manual

and those provided by the owner of this machine.

This Safety & Operation Manual

MUST

be located near the crimper at all times and be used as a reference

when required. Regulations for Work Safety and Prevention of accidents

MUST

also be available to the

operator of this crimper.

WARNING

Every crimper has been engineered to the highest possible standard and thoroughly tested prior to release.

Regardless of this, dangerous situations can arise if the safety rules and regulations are not adhered to when

using the crimper.

Summary of Contents for GC32FLEX































































Search results

Summary of Contents for GC32FLEX

Reviews:

Related manuals for GC32FLEX

Brands by name

Popular brands

Gates GC32FLEX, Safety And Operation Manual

Search results

Summary of Contents for GC32FLEX

Reviews:

Related manuals for GC32FLEX

Brands by name

Popular brands