40
GC32FLEX / GC32FLEX TSI
GC32FLEX/TSI SAFETY AND OPERATION MANUAL
OPERATIONAL INFORMATION
QCT LOAD
Review e-Crimp™ Summary
The e-Crimp™ application indicates the correct die set to be used for
the specification hose/coupling combination.
Locate Correct Die Set
This may be located in the optional stand or in the die container.
2
1
Load Die Set
Load the Die Set with Gates Quick Change Tool (QCT). The head
must be in the fully retracted position.
3
Align Dies
Align the rear channels of the dies between the die retainer plates
on the Crimper shoes.
4
Insert QCT
Insert the QCT by pushing the handle in to disengage the dies, then
twisting to the left, or counterclockwise, until the die fingers are
disengaged. (Red aligns with red on decal).
Withdraw QCT
5
6