Gates GC32FLEX Safety And Operation Manual Download Page 13

Page: 13 / 62

GC32FLEX

GC32FLEX/TSI SAFETY AND OPERATION MANUAL

GETTING TO KNOW YOUR CRIMPER

CRIMPER GENERAL LAYOUT

A precision 2” hose crimp press for the production

of Gates hose assemblies of all types. The unit is

designed for low volume shop production and can be

used with any 10,000 PSI hydraulic power unit.

A tablet command interface with Gates e-Crimp™

allows the user to look up relevant crimp data quickly

to ensure efficient operation of the machine. The Unit

can be upgraded to a TSI variant at any time by order-

ing the part number 7482-0123.

Tablet Holder:

Holds Tablet Supplied with Gates e-Crimp™

and Support Material.

Dial Indicator:

Identifies Set Point for each hose assembly.

Forklift Channels:

Used to lift/move Crimper machine.

Crimper Opening:

Operational Zone to Crimp Hose.

Power Unit Position:

Space for External Power Unit (10,000 PSI).

Power Unit not included.

Inlet:

3/8” NPT Swivel.

Min Oil Capacity Requirement:

2 Litres (0.5 gal).

Strap Points

Inlet: Swivel 3/8” NPT

Power Unit Position

Crimper Opening

Forklift Channels

Electronic

Dial Indicator

Tablet

Holder

GC32FLEX

Summary of Contents for GC32FLEX































































Search results

Summary of Contents for GC32FLEX

Reviews:

Related manuals for GC32FLEX

Brands by name

Popular brands

Gates GC32FLEX, Safety And Operation Manual

Search results

Summary of Contents for GC32FLEX

Reviews:

Related manuals for GC32FLEX

Brands by name

Popular brands