ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 97 of 132
•
To exit the menu without saving the most recent
changes
, click “
Continue
.”
•
To remain in the menu, click “
Cancel
.” The most recent
changes remain on the screen for further editing. They
are not sent to the transmitter.
Miscellaneous Options
5.8.5.1 Time Average Viscosity
The Miscellaneous Options section allows for calculation
and display of the time-averaged viscosity parameter
output values.
The Miscellaneous Options section is shown in Figure 5.23.
Figure 5.23: Miscellaneous Options
–
Time Averaging of
Viscosity-Related Output Values
5.8.5.2 Enabling and Using the Time Average
Viscosity Feature
•
Click the “Time Average Viscosity” checkbox to enable
Time Averaging of the viscosity related output values.
•
Enter the desired averaging time into t
he “Averaging
Time Span
”
in units of seconds
.
•
Click
ENTER/RETURN
on the keyboard.
•
Click on another toolbar button to trigger the “
Save
Changes
” Dialog.
•
To save the most
recent changes, click “
Save
.”
This
sends the updated information to the transmitter.
•
To exit the menu without saving the most recent
changes
, click “
Continue
.”
•
To remain in the menu, click “
Cancel
.” The most recent
changes remain on the screen for further editing. They
are not sent to the transmitter.
If a checkmark is placed in the ‘Time Average Viscosity’
box, this applies time averaging to the displayed viscosity
parameter AND ALL viscosity related parameters ON ALL
OUTPUTS configured to output a viscosity parameter.
