ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 74 of 132
Technician elevated access level password within the ViscoSite
software. The user must already be signed in at an elevated access
level to use this function.
•
See Section 5.3 for a discussion of software access levels and
changing passwords.
Toolbar (Operator Level)
The Operator level toolbar, located at the bottom of the home screen,
is shown in Figure 5.2.
Figure 5.2: Toolbar (Operator Level)
The Operator level toolbar allows the Operator level user to navigate
through the various configuration and setup menus of the ViscoSite
software in
Read-Only
mode. The functionality of each button is
described below.
•
Home Page
–
Selection returns to the home screen of the ViscoSite
software.
•
Display Setup
–
Selection displays
the “Display Setup” screen,
allowing review of the transmitter’s
LCD configuration. See Section
•
Output Config
–
Selection displays the “Output Configuration”
screen, allowing review of the transmitter’s analog and
(digital)
relay output configurations. See Section 5.7.
•
Option Setup
–
Selection displays the “Option” screen, allowing
review of the parameters that affect a subset of the outputs of the
ViscoSite system. See Section 5.8.
•
Exit
–
Selection terminates the
PC’s
connection to the ViscoSite
transmitter and closes the software application.
5.3 Software Access Levels and Changing Passwords
The ViscoSite software provides three access levels:
•
Operator (Read-Only)
•
Technician
•
Factory
Each access level has different permissions within the software.
Technician and Factory access levels are password protected; the correct
password must be entered to gain elevated access/privileges associated with the
desired access level.
