Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 72 / 87

-70-
Store Reference:
Choose CH (1...4).
When a channel is selected and STORE REFERNCE key is entered the current
reading of the channel will be stored as Reference
When a channel is selected and RESET REFERENCE key is entered the
Reference value will be defaulted to zero.
Normalization:
Choose CH (1...4).
Choose the channel (CH1 / CH2 / CH3 / CH4) with which the selected channel
needs to be normalized and Normalized Key is entered. The Channel gets
normalized.
Note:
Normalized Channel values are displayed in Green color.
Calibrate Analog Outputs
You can Calibrate Analog Outputs or adjust the 0/4- 20 mA loop, this is like a trim
pot adjustment.
For example, the 4 mA to 4.00 mA (Zero setting) and 20 mA to 20.00 (Factor
setting) as the technician sets these loops he can iterate between the zero and
factor to adjust the 4-20 mA exactly to the right levels.
Choose
CH (1...4)
Choose Zero Setting and Tap/Click on "+" or "-" in order to increment or
decrement by 0.025.
Choose
Factor Setting and Tap/Click on "+" or "-" In order to increment or
decrement by 0.0005 value.