Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 69 / 87

-67-
6.6.5.1 File Menu
The parameters set by the user can be saved and these can be retrieved at a
later point of time.
Choose Save Parameters to File. You will see a dialog pop up Specify the
name of the file in which the parameters need to be saved. These files will be
stored with .pda extension and are referred as PDA Files.
Choose Load Parameters from File. You will see a dialog pop up. Select the file
in which the parameters have been stored earlier. During the process of reading
the data from the File and Transferring to Messenger Device, the percentage of
data that has been transferred will be displayed on the button.
Choose Load Firmware to prepare the Messenger Device ready for Installation
of Firmware.
6.6.5.2 View Channel Outputs
Here you can view the outputs from all the 4 channels and Messenger Ambient
Temp.
Raw Data:
Raw Data is channel mV displayed irrelevant of ZERO DARK CURRENT.
Channel Signal :
Channel signal is Channel mV displayed after we subtract the ZERO DARK
CURRENT.
Choose Show Raw Data / Show Channel Signal Toggle Button to switch
between the display of Raw data and Channel signal.