Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 58 / 87

-56-
6.6.2.1 Process Calibration

Build Calibration

View/Edit Calibration

Fit Data

Copy Fact Table
Build Calibration
For each Sensor, up to 8 different samples can be used during the calibration
process.
Select the Sensor number by choosing the
Sensor Toggle Button.
Select the Sample number by choosing the
Sample
Toggle Button.
Enter the
User Value (Ex: - Known concentration value of a Standard) in the text
box provided. This value can also be changed using
View/Edit Calibration
menu.
Choose Read New Data to capture the data.
Choose
Store New Value
to store the data.
Repeat steps 2 to 5 for each sample.
View/Edit Calibration
The selected Sensor number appears on the top. The data present in the
selected process calibration table can be viewed/edited using the following
option.
To edit
user value or data, Tap/Click on the cell.
Choose Graph to view the curve fit based on the Fit Type selected.
Choose
Edit Sensor Equations
to alter the Sensor Equations.