Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 67 / 87

-65-
Choose Type Toggle Button to specify the type of Alarm.
Choose Limit text box to specify the mV. Choose Delay on Make/Break Text box
to specify the delay in which the condition needs to be met at least before the
alarm is reported.
Choose on Hysteresis to Specify the Hysteresis value
The Hysteresis value will not have any affect for High and Low Latches.
In case any of the Alarms are not used, make sure that
Type and Assigned
Signal are "NOT ASSIGNED".
6.6.4.5 Set Messenger Unit ID
The UNIT ID is necessary when multi-units are connected on the same bus.
Choose Unit ID to specify the ID of the Messenger. The Unit ID should lie
between 1...255.
Choose
Messenger Tag
to specify the extra information for easy identification
when multiple devices are connected in the network.
6.6.4.6 Set Relay Functions
This menu allows the user to assign the FUNCTION of the Relay.
Functions available are:

NOT ASSIGNED

Alarm 1

Alarm 2

Alarm 3

Alarm 4

General Fault

Cleaning device 1

Cleaning device 2
Relay functions in 2 states

Active ON

Active OFF Fail -Safe