Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 59 / 87

-57-
Fit Data
Choose the type of Curve Fit to be performed on the Calibration data. There are
4 options available.

Linear Fit Process Data

Curve Fit Process Data

Linear Fit Factory Data

Curve Fir Factory Data
Copy Factory Table
The selected sensor's factory calibration table is copied to process calibration
table.
6.6.2.2 Factory Calibration

Build Calibration

View/Edit Calibration
Build Calibration
For each Sensor, up to 8 different samples can be used during the calibration
process.
Select the Sensor number by choosing the Sensor Toggle Button.
Select the Sample number by choosing on the
Sample
Toggle Button.
Enter the
User Value
(Ex: - Known concentration value of a Standard) in the text
box provided. This value can also be changed using View/Edit Calibration
menu.
Choose Read New Data to capture the data.
Choose Store New Value to store the data.
Repeat steps 2 to 5 for each sample.