Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 38 / 87

-36-
3.6 Error and Warning Messages
Error/Warning Messages Description
Restart the program to change
language. For New Language settings to take effect
Restart the Messenger Application
CAUTION! Download-Program
required. Messenger will be
stopped. Continue anyway? "Flip" Program is required to load the
Firmware. Messenger Device should be
stopped to load the Firmware
Save these values?
Existing Parameters have changed. Do
you want to save the NEW Parameters
Normalize to 0 Normalize means to set in relation to a
selected channel. If this channel is "0", it
would result in a "Divide by Zero"!
Warning: All Data in the Messenger
will be defaulted to factory settings,
Are you sure? ALL the existing PARAMETERS &
PREVIOUS DATA will be lost and
Messenger will be defaulted to factory
settings
Value out of range Entered value exceeds the specified
range of the parameter
Invalid File Format Selected file (*.pda) is corrupt
Saving these values will cause in
Loss of "Previous Data" Changing the existing parameters will
clear "Previous Data"
Invalid File Extension Selected file doesn't have .pda extension
No Data Available Currently there is no "Previous Data"
stored
No More Data Points There are no more data points in the
current DATA frame to Navigate
Are you sure you want to clear
stored Results "PREVIOUS DATA" of Selected Result
will be cleared