Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 40 / 87

-38-
You are OFFLINE. Please load file
first To Edit the parameters in OFFLINE
mode you need to First load the .pda
File.
NO RESPONSE Communication between GUI and
Messenger Device has failed. Verify
the connections.
Lower Limit cannot exceed upper
Limit Entered parameter Lower Limit value
exceeds the upper limit value.
Optics Fault Optical Fault has occurred
Lamps Fault Lamp Fault has occurred
Fault: -- mA Fault is registered at Analog output.
Where -- Represents the fault current.
List of Codes displayed in STATUS BAR of MEASURMENTS SCREEN
are shown below.
1 Alarm 1 Active
2
Alarm 2 Active
3 Alarm 3 Active
4 Alarm 4 Active
CC1 Cleaning Event1 Active
CC2 Cleaning Event2 Active
For Example: -
Code in STATUS BAR “1,3,CC1” indicates that Alarm1, Alarm2 and Cleaning
Event1 are currently Active
List of Messages displayed on LCD Display.
OpticFlt Optical Fault has occurred
LampsFlt Lamp Fault has occurred
Data Transfer… Data Transfer between Messenger and
GUI in Progress