Galvamet KompaKOne, Installation, Operating And Maintenance Manual

Page: 132 / 380

56
EN
BRIDGE FUNCTION (zones 14 and 15)
With this function it is possible to manage two zones with equal size .
The two zones are activated at the same time and controlled only through one of them.
Activation
whether the two cooking zones operate at a different level, or at level 0, touch at the
same time and of the related cooking zones;
Now the two zones are operating together.
The level of the control zone display is shown, while the display of the controlled zone
shows ;
When the function is active, you can set the timer, fast cooking function cannot be
activated.
Should no pot on the final cooking zone be detected within 10 minutes, the bridge function
is automatically deactivated.
Deactivation
Touch at the same time and of the related cooking zones (same as per activation).
The function turns off, the display of the two cooking zones show and can be set again.
RESIDUAL HEAT INDICATOR
Appliances also features residual heat indicator . Cooking zones are not heated directly,
but through return heat radiating from the dish. As long as is on after the cooking zone
was turned off, the residual heat may be used for warming up food or for melting.
Even when disappears, the cooking zone may still be hot.
Caution! Burns hazard!