Future Design MCT-MC 4.3, User Manual

Page: 40 / 186

MCT-MC
4.3
FDC MCT-MC - 40 - Configuring the MCT-MC
MC Function Runtime Menu Location Description
Alarm Settings Device\Settings\Set\Alarm access alarm settings
NOTE: Alarms can be fully programmed in the
Configurator and hidden in the runtime by disabling this
function. The alarms will operate as programmed in the
background removing all access by the operator.
Email/SMTP Settings Device\Settings\Email\Email access to view/configure email settings
Communication Settings Device\Settings\Set\Comms
Notifications access to web server, Modbus and VNC settings
view web server and VNC status
Edit Event Names Device\Settings\Set\Event access to view/edit system event names
NOTE: Event names can be assigned in the runtime and
then this item disabled to prevent changes to event
names.
Temperature Units Device\Settings\Offline\Set\Units access to set temperature units
Input Calibration Device\Settings\Offline\Calibrate\Inputs access to input calibration for all loops installed
Import/Export Setup Device\Settings\Offline\System\
Configuration access import/export utility to back up current Orion-M
configuration or restore configuration from back-up file
Setpoint Limits Device\Settings\Set\Limit access loop set point high and low entry limits
Language
Device\Settings\Offline\Set\Language
access to set the MC display language selection for
menus and online help
Exit Application Device\Settings\Offline\System\Exit access to the exit application screen
Exit to Configurator Device\Settings\Offline\System\Exit –
“Exit Application. (configuration mode
startup)” button access to the exit the application and start the
Configurator on the next power cycle
Loop view Manual
Operation View\Loop – “Manual Operation” button access for turning manual events on and off
Loop View Program
Operation View\Loop – “Program Operation” button access to program selection and run/hold control