MCT-MC
4.3
Configuring the MCT-MC
- 23 -
FDC MCT-MC
4.3.1 Tagname
The Tagname entry allows the user or OEM to assign a specific name for each control loop, up to 11 characters
in length. This name will be used throughout the MC runtime application and can be used to provide a more
detailed description as to the function the loop provides. Default tag names are LOOP 1 through LOOP 10.
4.3.2 Input Type
The Input Type entry is used to select the type of sensor that will be connected to the loop control. The input
type can be a temperature input (thermocouple or RTD) or a linear input type (Vdc or mA).
The input type selections are mutually exclusive, i.e., selecting one input will turn all other selections off. Once
the desired input type has been selected, press the “Done” button to set the input type for the loop control board
and return to the main Loop Configuration screen.
NOTE:
The loop control board is ordered with either a standard input for thermocouples and RTD’s, a voltage
input or a milliamp input. The selected input type must be set to match the type of input supplied on
the loop control board or the unit will not operate correctly.
4.3.3 Input Units
The Input Units entry is used to select the temperature units for temperature input types (thermocouple or RTD).
If the selected input type for the loop is a linear input (Vdc or mA), the Input Units entry will display the text entry
keypad allowing the user or OEM to enter specific engineering units up to 4 characters.
Summary of Contents for MCT-MC 4.3
