MCT-MC
4.3
Appendix
- 185 -
FDC MCT-MC
FUTURE DESIGN SOFTWARE LICENSE - For FDC MC Controller
Future Design Controls Windows CE based MC display software (listed as “SOFTWARE” in this document) is
protected by copyright laws and international copyright treaties, as well as other intellectual property laws and
treaties. The SOFTWARE is licensed at no charge to the end user when all components, including but not
limited to the CE Color Touch Screen display are purchased from Future Design Controls. All ownership and
rights remain with Future Design Controls.
I. LICENSE GRANT.
This LICENSE grants you the following rights:
A. You may use Future Design’s SOFTWARE with Future Design Controls products or products marketed by Future Design
Controls only. Products are considered Future Design Controls products (and products marketed by Future Design
Controls) when the sale or shipment originates from our main headquarters in Bridgeview, IL or one of our authorized office
locations. Products purchased from Future Design Controls distributors or OEM's with brand labels other than Future
Design controls are not considered Future Design Controls products and cannot be used with Future Designs SOFTWARE.
Using Future Design's SOFTWARE with any other manufacturer (or distributor) of hardware is a violation of this license and
applicable copyright laws. The SOFTWARE is considered in "use" when it is installed into permanent or temporary memory
(e.g. CE display unit or other storage device)
B. Solely with respect to electronic documents included with the SOFTWARE, you may make a copy (either in hardcopy or
electronic form), provided that the software is not resold without the knowledge and acceptance of terms by Future Design
Controls.
II. TITLE; COPYRIGHT.
All title and copyrights in and to the SOFTWARE (including but not limited to any images, photographs, animation, video,
audio, music, text and "applets" incorporated into the SOFTWARE), the accompanying printed materials, and any copies of
the SOFTWARE are owned by Future Design Controls or its suppliers. The SOFTWARE is protected by copyright laws
and international treaty provisions. Therefore, you must treat the SOFTWARE like any other copyrighted material, except
that you may either (A) make one copy of the SOFTWARE solely for backup or archival purposes or (B) install the
SOFTWARE on each system purchased from Future Design Controls (CE display) provided you keep the original solely for
backup or archival purposes. You may not copy the printed materials accompanying the SOFTWARE.
III. ADDITIONAL RIGHTS AND LIMITATIONS.
A. Reverse Engineering, De-compilation, and Disassembly: You may not reverse engineer, decompile, disassemble or
modify the SOFTWARE (CE display software).
B. No Separation of Components. The SOFTWARE is licensed as a single product and the software programs comprising
the SOFTWARE may not be separated for use on any hardware not supplied by Future Design Controls.
C. Rental. You may not rent or lease the SOFTWARE.
D. Software Transfer. You may NOT transfer any of your rights under this LICENSE.
E. Termination. Without prejudice to any other rights, Future Design Controls may terminate this LICENSE if you fail to
comply with the terms and conditions of this LICENSE. In such event, you must destroy all copies of the SOFTWARE and
agree not to modify/distribute the software or download to any hardware not purchased from Future Design Controls.
F. The selection, application and use of Future Design products and/or software is the sole responsibility of the purchaser
or end user. No claims will be allowed for any damages or losses, whether direct, indirect, incidental, special or
consequential. In addition, Future Design reserves the right to make changes without notification to purchaser or user to
materials or processing that do not affect compliance with any applicable specification. Future Design Controls makes no
warranties when using Future Design Controls SOFTWARE system.
Summary of Contents for MCT-MC 4.3
