Future Design MCT-MC 4.3, User Manual, Page: 132 / 186

MCT-MC
4.3
FDC MCT-MC - 132 - Offline Setup
You must use the assigned IP address to access the MC. The IP address is shown on the communications
screen and is also included in the notifications list. Write down the IP address so you will have it later to enter
into your web browser.
NOTE: Contact your network administrator prior to enabling the web server of the MC. Company policy may
prohibit the use of web servers for security reasons. Future Design Controls is not responsible for the
use of, nor makes any claims as to the security of the web server interface over your network. The use
of the web server is the responsibility of the end user.
To access and view the MC web page, enter the following link in your PC’s browser address window:
http://”IPaddress”/orion.html . Using the IP address from the sample screen, the entry would be:
http://192.168.1.2/orion.html . The following example is typical of the MC web page appearance. The web page
updates automatically every 30 seconds and provides information on each individual control loop, ramp/soak
program status, alarm status and system event status.