Future Design MCT-MC 4.3 User Manual Download

Page: 52 / 186

MCT-MC

4.3

FDC MCT-MC

- 52 -

Basic Operation

5.3.4 Data Menu

The data log menu is provided when the user selects “Data” from the main “Data” menu. See section 8 on Data
Logging for information on these settings and their use.

5.3.4.1 Text Based Data Logging Menu

The

View

menu provides access to the data file Annotation and digital Signature

screens.

The

File

menu provides functions for opening and deleting historical data log files.

The

Data

menu provides access to the main Data screen for starting and stopping

data logging and to the log point Assignment screen where the user can select
which items are to be logged to the history file.

The

Chart

menu provides functions for viewing historical data files in graphical

format.

The

Utilities

menu provides access to the MC file management utilities including

USB file transfer and FTP/WAN back-up.

Summary of Contents for MCT-MC 4.3



























































































































































































Search results

Summary of Contents for MCT-MC 4.3

Reviews:

Related manuals for MCT-MC 4.3

Brands by name

Popular brands

Future Design MCT-MC 4.3, User Manual

Search results

Summary of Contents for MCT-MC 4.3

Reviews:

Related manuals for MCT-MC 4.3

Brands by name

Popular brands