Future Design MCT-MC 4.3, User Manual

Page: 42 / 186

MCT-MC
4.3
FDC MCT-MC - 42 - Configuring the MCT-MC
4.7 Event Names
The Event Names screen accessed from the Tagnames menu and allows the user or OEM to edit the names
of all configured event outputs. In order to access the screen, there must be at least one loop control output
configured as an event.
The events will be listed in sequential order starting with any outputs programmed as an event on loop 1 through
loop 10. The default event names are EV1, 2, 3, etc. To assist in identifying which device/output the event is
assigned to, the list includes the event source. The event names will be displayed in the runtime application
on the Manual Operation slide out, All View and program Entry screens. To change the name of an event,
select the event from the list and enter the desired text up to 9 characters.
4.8 Custom Name\Address
The Custom Name\Address screen is accessed from the Tagnames menu and is typically used by the OEM to
configure the main splash screen when the MC runtime application starts. It allows the company name and
contact information to be entered and shown each time the MC is powered up. It also allows the name of the
controller to be changed in order to adapt it to a specific product or market.
To edit the company, address, phone number or controller (product) name, press the field and enter the desired
text. Each field can be entered with a maximum of 24 characters that will be displayed on the splash screen
when the MC starts.