Future Design MCT-MC 4.3, User Manual

Page: 111 / 186

MCT-MC
4.3
Offline Setup - 111 - FDC MCT-MC
minutes for it to be saved. In order to insure that the system powers up with the desired set point, maintain
power to the MC after a set point change for at least 6 minutes before removing power.
10.2 Degrees C/F Units Selection
The MC can display temperatures in either degrees Centigrade or Fahrenheit. To change the temperature
display units, select “Units” from the offline Set menu.
Press the button for the desired temperature units to make the selection. The choices are mutually exclusive
so when one selection is made, the other will be de-selected.
NOTE: When changing display units, ramp/soak program set points will not be converted between units.
Separate programs are required for each temperature range. Operating the MC with programs that
have been written using alternate units could cause property damage or personal injury.
10.3 Clock Settings
The system date and time is adjusted from the “Adjust Time” tab under the Set/Clock menu. The current date
and time will be displayed in the thumb wheels as shown below.
To make adjustments, scroll each time wheel to adjust the month, day, year, hour, minutes, seconds and
AM/PM selection. Once all adjustments have been made, press the “Save” button to set the system clock to
the date and time entered.