MCT-MC
4.3
Configuring the MCT-MC
- 19 -
FDC MCT-MC
4 Configuring the MCT-MC
IMPORTANT:
Once all configuration settings are made, you must select “Exit” from the File menu to exit the
Cconfigurator prior to cycling power to the MC. All configuration files are written upon exiting
the Configurator. Do not cycle power prior to exiting the Configurator or settings will be lost
and the MC will not operate properly once the runtime application starts.
The MC Configurator is a powerful tool that is built in to the system. It is a program that allows the OEM or user
to set up control system options for the MC runtime application. This allows for on-the-spot setup of the MC
without the need for external hardware and software. The user or OEM must first run the Configurator prior to
putting the MC into service in order to properly setup the system for its intended use.
The Configurator program does not run at the same time as the main runtime software. It can be run by exiting
the runtime software via the Offline Setup\Exit Application screen. When the “Exit application (configuration
mode startup)” option is selected, on the next power-up, the Configurator application will automatically start.
From the Configurator, the user or OEM can then setup all process loop controls as well as choose from a long
list of standard features to provide in the runtime application. During setup, the output control functions of each
device can be changed, so any equipment being controlled by the outputs should be placed in an “off” state, so
that any modifications to output functions will not cause an unsafe condition or damage to equipment.
NOTE:
On exit of the MC Configurator application, the MC runtime application will automatically run on the
next power-up.
The MC Configurator provides the following functionality:
Set the number of control loops that the system will use (one to ten).
Provide control loop configuration settings for input type, output function, set point range, etc.
‘Splash Screen’ name editing for custom OEM or user requirements
Enable/disable options for runtime menu and screen availability
Text editing for all system event and alarm names
The Configurator menu is accessed by pressing the “Monitor” icon at the top left of the screen.
Summary of Contents for MCT-MC 4.3
