MCT-MC
4.3
FDC MCT-MC
- 122 -
Offline Setup
The brightness of the display during operation is set by adjusting the “ON” slider. The default setting is 100.
The “OFF” slider is used to adjust the brightness of the display during periods of inactivity. The default setting
is 10. Note that a setting of zero (0) does not completely turn off the backlight.
To enable the backlight dimming function, place a check in the “Automatically turn off backlight.” checkbox
and set the delay time using the drop down selection box. The delay time can be set at fixed intervals from as
little as 15 seconds to as long as 30 minutes.
Once all settings are complete, press the “OK” button and then press the “OK” button at the top right of the
“Display Properties” window to return to the MC application and begin normal operation.
10.7 Configuration
The Configuration utility allows the user to back up the entire configuration of the MC and save it to a file for
“safe keeping” in case of system damage due to a lightning strike, etc. The utility also allows the MC to be
configured with a push of a button by selecting from a list of preconfigured setups that could be created and
saved on a USB memory device for loading a configuration to a new MC system.
IMPORTANT: Do not import configuration files that are not intended for use with the current hardware
configuration of the MC as unexpected operation may result.
Summary of Contents for MCT-MC 4.3
