Furuno FR-10, Operator'S Manual

Page: 90 / 171

2. OPERATION
2-54
2.40 Navigation Data
Navigation data can be displayed at the bottom of the screen. The figure below shows
the navigation data display
1. Press the MENU key to open the menu
2. Press

or

to select [Display], then press the ENTER key.
3. Press

or

to select [Data Box], then press the ENTER key.
4. To show or hide the navigation data at the bottom of the screen, operate the
DATA BOX knob to select [OFF], [NAV], [TGT] or [ALL].
[ OFF ]: Turn off the data box display.
[ NAV ]: Navigation data
[ TGT ]: TT and AIS data (see section 4.10, section 5.4.)
[ ALL ]: Navigation data plus TT and AIS target data
5. Press the MENU key to close the menu.
2.41 Waypoint Mark
The waypoint mark shows the location of the destination waypoint set on a navigation
plotter. The heading signal or course data are required. You can turn on/off the way-
point mark as follows:
1. Press the MENU key to open the menu.
- Cursor latitude position
- Cursor longitude position
- Time to go to cursor position
Your ship position and speed
- Bearing from your ship to waypoint
- Range from your ship to waypoint
- Time to go from your ship position to waypoint
ﾟ
ﾟ
ﾟ
ﾟ
ﾟ
図 表示
+
Waypoint
mark