Furuno FR-10, Operator'S Manual

Page: 65 / 171

2. OPERATION
2-29
2. Put the cursor on the position where to off-center the display.
3. Press the
MENU key to open the menu.
4. Press  or  to select [Display], then press the ENTER key.
5. Press  or  to select [Save Offcenter], then press the ENTER key.
The message "Complete" appears.
6. Press any key to close the message window.
7. Press the
MENU key to close the menu.
2.24 Zoom
The zoom function expands the length and width of a selected target as much as twice
its normal size, in the zoom window. You select the target to zoom with the zoom cur-
sor. The selected target is zoomed in the zoom window.
TT and AIS symbols can be displayed in the zoom window, but are not zoomed. You
can process TT and AIS targets that are in the zoom window, in the same method as
on the normal radar display.
2.24.1 Zoom reference
There are three types of zoom.
• [Relative]: The zoom cursor is fixed to the range and bearing from your ship. Shown
as “(R)” on the top left of the screen.
• [True]: The zoom cursor is fixed to set geographical position. Shown as “(T)” on the
top left of the screen.
• [Target]: The zoom cursor is fixed to the zoomed AIS or TT target. Shown as “(A)”
on the top left of the screen.
1. Press the MENU key to open the menu.
2. Press

or

to select [Display], then press the ENTER key.
3. Press

or

to select [Zoom Reference], then press the ENTER key.
4. Press  or  to select [Relative], [True] or [Target] then press the ENTER key.
Note: True zoom mode requires a heading signal and position data.
5. Press the MENU key to close the menu.
2.24.2 How to zoom
Relative or True zoom mode
1. Use the cursorpad to put the cursor on the position desired.
2. Press the
MENU key to open the menu.
3. Select [Display], then press the ENTER key.