2-1
2.
OPERATION
2.1
Display Unit Controls
Description
1:
MENU
key. Press to open/close the menu.
2:
CANCEL/HL OFF
key.
During normal operation (press and hold)
:
Hides the heading
line.
During normal operation (short press)
:
Removes cursor select-
ed marks/TT targets or sleep AIS targets.
During menu operation:
Go up one layer in the menu or cancel
the current selection.
3:
ENTER
key.
During normal operation (tracked targets)
:
Press to track the
selected target or activate an AIS target.
During normal operation (untracked targets)
: Press to show
the data for the selected TT or active AIS target.
During menu operation
:
Selects/confirms the item selected in
the menu.
4:
CURSOR
pad.
During normal operation
:
Moves the cursor on the radar screen.
During menu operation
:
Selects menu items or menu options.
5:
EBL
key. Measure the bearing to a target.
6:
VRM
key. Measure the range to a target.
7:
OFF CENTER
key. Toggles the off-center setting between [Off]
and [Manual]/[Custom].
8:
TARGET ALARM
key.
With no alarm areas set
:
Creates a start point for an alarm area.
With alarm areas set
:
Toggles selection of the alarm areas.
9:
TLL
key.
With TLL output enabled
: Outputs the cursor location (coordi-
nates) to a chart plotter, etc. which is connected to the same net-
work.
With Fixed Marks mode active
:
Shows the fixed marks.
10:
RANGE
keys. Adjusts the range.
11:
CUSTOM
key. Recalls and applies custom presets.
12:
TRAILS
key.
Short press
: Toggles the trail time settings.
Press and hold
: Erases the trail.
13:
STBY/TX
key. Toggles the radar between standby and trans-
mit modes.
14:
A/C SEA
knob.Turn to adjust the [MANUAL SEA] setting.
Press to activate the function for the F2 key.
15
GAIN
knob. Turn to adjust the gain. Press to activate the func-
tion for the F1 key.
16:
A/C RAIN
knob. Turn to adjust the [MANUAL RAIN] setting.
Press to activate the function for the F3 key.
17:
POWER/BRILL
key.
Short press
:
Shows the brilliance/contrast settings.
Press and hold
:
Turns the power on/off.
1
5
7
9
11
13
15
4
6
8
10
12
14
16
17
2
3
Summary of Contents for FR-10
