Furuno FMD3100, Operator'S Manual

Page: 65 / 395

2. OPERATIONAL OVERVIEW
2-29
Recalculate timetable and ETA values
Timetable and ETA values can be recalculated from the [Optimize] page in the [Route
Plan] dialog box. Minimally set ETD to equal departure time, and set optimization val-
ues.
2.10.3 How to check and prepare route, user chart to monitor
Select the route to monitor, view linked user charts
Select a route for the voyage: In the Voyage navigation mode, click the [Voyage],
[Route] and [Select] buttons, or right-click the route indication in the [Route Informa-
tion] box (right edge of screen) then select [Select Route]. See chapter 11. The [Mon-
itor Information] dialog box appears, showing the [Waypoints] tab.
Note: A route cannot be opened if its planned settings are different from its navigation
settings. The reason is given on the [Select Route] dialog box. In this case, open the
route in the Voyage planning mode and click the [Check Route] button, on the [Alert
Parameters] page. Adjust the route as necessary.
The To WPT can be selected, however WPT 01 cannot be selected.
Route Bank