manualshive.com logo in svg

Furuno FMD3100, Operator'S Manual, Page: 297 / 395

Share
Download
Furuno FMD3100 Operator'S Manual Download Page 297

20.  ALERTS

20-3

Alert message display format

Priority of 

alert

 

 

 
 
 
 
 

 

 

 

 

 

 

 

 
 

 

 

 

 

Emergency,
Alarm 

Emergency,
Alarm

Warning

Warning

Caution

Emergency,
Alarm,
Warning

Caution

Acknowledged, Not rectified.

- Not acknowledged, Not rectified.
  OR
- Not acknowledged, Rectified.

  

Displayed
alternately

Acknowledged, Not rectified.

Not rectified.

Acknowledged, Rectified.

Rectified.

Black characters on red
background. 
(Flashing)

Black characters on 
yellow-orange.
(Flashing)  
  

Yellow characters on
gray background.

No display.

No display.

 

Alert indication

Alert state

Display state

Yellow-orange 
characters on
gray background.

Yellow-orange 
characters on
gray background.

Red characters on
gray background.

Red characters on
gray background.

- Not acknowledged, Not rectified.
  OR
- Not acknowledged, Rectified.

 

!

!

!

Displayed
alternately

172

Off Track Alarm

172

Off Track Alarm

172
Off Track Alarm

30510
No Filter Source

30510
No Filter Source

30510
No Filter Source

30400

Wind Direction/Wind

Summary of Contents for FMD3100












































































































































































































































































































































































































Reviews:

No comments