manualshive.com logo in svg

Furuno FMD3100, Operator'S Manual, Page: 171 / 395

Share
Download
Furuno FMD3100 Operator'S Manual Download Page 171

9.  ROUTES

9-25

9.13

Reports

This ECDIS generates reports for waypoints in the selected route. If connected to a 
printer, reports can be printed by clicking the [Print Text] button. Text in reports can be 
searched with the [Find] button.

To generate a report, do the following:

1. Click the [PLAN] button to go to the Voyage planning mode.
2. Click the [Report] button followed by the [Route] button. Click applicable “report” 

button - [WPT], [Full WPT] or [Passage].

The following dialog box appears.

3. Select the appropriate route then click the [Open] button to show the selected re-

port. See the next several pages for examples.

177.51NM

Summary of Contents for FMD3100












































































































































































































































































































































































































Reviews:

No comments