The following table shows examples of possible values for the necessary access data. You
can enter your personal data in the "Your values" column, so that you can refer to these
values later when needed.
If you configure a new network, you can use the given example values for IP addresses
and netmasks. In cases of doubt, ask your system administrator.
Basic configuration
For a basic configuration of your gateway, you need information that relates to your net-
work environment:
Basic information
Access data
Example value
Your values
IP address of your gateway
Netmask of your gateway
Internet access over ADSL
If you want to set up Internet access, you need an Internet Service Provider (ISP). You also
receive your personal access data from your ISP. The terms used for the required access
data may vary from provider to provider, However, the type of information you need for dial-
in in is basically the same.
The following table lists the access data that your device also needs for a DSL connection
to the Internet.
Data for internet access over ADSL
Access data
Example value
Your values
Provider name
Protocol
"
Encapsulation
#$!! %&
VPI (Virtual Path Identifier)
VCI (Virtual Circuit Identifier)
'
Your user name
()*
Password
+,-%
Some Internet Service Providers, such as T-Online, require additional information:
Additional information for T-Online
4 Basic configuration
Funkwerk Enterprise Communications GmbH
14
R1xxx/R3xxx/R4xxx
