Field
Description
Possible values:
•
1&&
(default value): Your device is dynamically
assigned an IP address.
•
-%
: You enter a static IP address.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
#/
.
The function is enabled by default.
Create NAT Policy
Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is enabled with
#/
.
The function is enabled by default.
Local IP Address
Only for
IP Address Mode
=
-%
.
Enter the static IP address you received from your provider.
Route Entries
Only if
IP Address Mode
=
-%
Define other routing entries for this connection partner.
Add new entries with
Add
.
•
= 1&&
: IP address of the destination host or
network.
•
*&
: Netmask for
Remote IP Address
. If no entry is
made, your device uses a default netmask.
•
(%
: The lower the value, the higher the priority of the
route (possible values
...
). The default value is
.
The menu
Advanced Settings
consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
Block after connection
failure for
Enter the wait time in seconds before the device should try
again after an attempt to set up a connection has failed. The de-
17 WAN
Funkwerk Enterprise Communications GmbH
250
R1xxx/R3xxx/R4xxx
