Funkwerk Bintec R1200wu, Reference

Page: 286 / 518

Field Description
The function is enabled with
#/
.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle
Timeout
Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are to
'
(seconds). deactivates the
short hold.
The default value is .
Fields in the AUXIP Mode and Routes menu
Field Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically or whether it
should be assigned this dynamically at the remote terminal.
Possible values:
•
1&&
(default value): Your device is dynamically
assigned an IP address.
•
-%
: You enter a static IP address.
•
1&&
: Your device dynamically assigns an
IP address to the remote terminal.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
#/
.
The function is enabled by default.
Create NAT Policy
Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is enabled with
#/
.
17 WAN Funkwerk Enterprise Communications GmbH
260 R1xxx/R3xxx/R4xxx