Connect the SHDSL interface (
SHDSL
) of your device to the SHDSL connection us-
ing the DSL cable supplied.
(6) Mains connection
Connect the device to a mains socket using the mains adaptor supplied.
Optional connections
• ISDN
Connect the ISDN interface (
ISDN
or
ISDN-x
) of the device to your ISDN socket using
the ISDN cable provided.
• Other LANs/WANs
Connect any other terminals in your network to the remaining switch ports (
ETH2
,
ETH3
or
ETH4
) of your device using other Ethernet cables.
• Serial connection
For alternative configuration options, connect the serial interface of your PC with the seri-
al interface of the device. The serial interface can also be assigned to Ethernet socket 1
(
ETH1
). Use the serial cable provided, and if necessary connect your network to another
Ethernet socket. However, configuration via the serial interface is not provided by default.
• xDSL modem or DMZ
Connect the WAN interface (
ETH5/DMZ
) of your device to an xDSL modem (not sup-
plied) via another Ethernet cable or with the Ethernet connection on your DMZ.
• PRI (only
R4100
)
Connect the ISDN PRI interface (
PRI-0
or
PRI-1
) of the device to your PRI connection.
• X.21 (only
R4300
)
Connect an X.21 interface on your device to your
X.21/V.35
or
X.21/V.36
connection us-
ing a suitable cable (which you can order as an accessory for your router). Make sure
that you use an enabled X.21 interface. The left X.21 interface on the back of the device
is enabled by default ex works. The right X.21 interface can also be enabled if licensed.
• UMTS (only
R1200wu
)
Insert the UMTS card into the
CardBus / UMTS
slot.
The device is now prepared for configuration using the
Funkwerk Configuration
Interface
.
3 Installation
Funkwerk Enterprise Communications GmbH
10
R1xxx/R3xxx/R4xxx
