Field
Description
•
*
(default value): You can create a new rule chain with this
setting.
•
A* %/&& ,/B
: Select an already existing rule
chain, and thus add another rule to it.
Description
Enter the name of the rule chain.
Access Filter
Select an IP filter.
If the rule chain is new, select the filter to be set at the first point
of the rule chain.
If the rule chain already exists, select the filter to be attached to
the rule chain.
Action
Define the action to be taken for a filtered data packet.
Possible values:
•
1//
(default value): Allow packet if it matches the filter.
•
1// / & %
: Allow packet if it
does not match the filter.
•
3) / %&
: Deny packet if it matches the
filter.
•
3) / & %
: Deny packet if it does
not match the filter.
•
$
: Use next rule.
To set the rules of a rule chain in a different order, in the list menu for the entry to be shif-
ted select the
button. A dialog now opens, in which you can decide under
Move
whether
the entry
#/
(standard value) or
#
another rule of this rule chain is to be shifted.
14.5.3 Interface Assignment
In this menu, the configured rule chains are assigned to the individual interfaces and the
gateway’s behavior is defined for denying IP packets.
A list of all configured interface assignments is displayed in the
Networking
->
Access
Rules
->
Interface Assignment
menu.
Funkwerk Enterprise Communications GmbH
14 Networking
R1xxx/R3xxx/R4xxx
211
