Field
Description
The possible values are
to
, the default value is
'
.
Block Time
Enter the time in seconds for which the current server is to re-
main in blocked status.
At the end of the block time, the server is set to the status spe-
cified in the
Entry active
field.
The possible values are
to
'
, the default value is
. The
value
means that the server is never set to
</%
status
and thus no other servers are queried.
Encryption
Select whether data exchange between the server
and the NAS is to be encrypted with MD5.
The function is activated by selecting
#/
.
The function is enabled by default.
If the function is not enabled, the packets and all related inform-
ation are transferred unencrypted. Unencrypted transfer is not
recommended as a default setting and should only be used for
debugging.
10.5.3 Options
This setting possible here causes your device to carry out authentication negotiation for in-
coming calls, if it cannot identify the calling party number (e.g. because the remote terminal
does not signal the calling party number). If the data (password, partner PPP ID) obtained
by executing the authentication protocol is the same as the data of a listed remote terminal
or RADIUS user, your device accepts the incoming call.
The menu
System Management
->
Remote Authentication
->
Options
consists of the fol-
lowing fields:
Fields in the OptionsGlobal RADIUS Options menu
Field
Description
Authentication for PPP
Dialin
By default, the following authentication sequence is used for in-
coming calls with RADIUS: First CLID, then PPP and then PPP
with RADIUS.
Options:
10 System Management
Funkwerk Enterprise Communications GmbH
112
R1xxx/R3xxx/R4xxx
