Field
Description
addresses by UNICAST do not respond to DHCP requests with
the set BROADCAST bit. In this case, it is necessary to send
DHCP requests in which this bit is not set. In this case, disable
this option.
The function is activated by selecting
#/
.
The function is enabled by default.
Proxy ARP
Select whether your device is to respond to ARP requests from
its own LAN on behalf of defined remote terminals.
The function is activated by selecting
#/
.
The function is disabled by default.
TCP-MSS Clamping
Select whether your device is to apply MSS Clamping. To pre-
vent IP packets fragmenting, the MSS (Maximum Segment
Size) is automatically decreased by the device to the value set
here.
The function is activated by selecting
#/
.
The function is disabled by default. Once enabled, the default
value
'
is entered in the input field.
12.2 VLAN
By implementing VLAN segmentation in accordance with 802.1Q, you can configure
VLANs on your device. The wireless ports of an access point, in particular, are able to re-
move the VLAN tag of a frame sent to the clients and to tag received frames with a pre-
defined VLAN ID. This functionality makes an access point nothing less than a VLAN-
aware switch with the enhancement of grouping clients into VLAN groups. In general,
VLAN segmenting can be configured with all interfaces.
VLAN for Bridging and VLAN for Routing
In the
LAN
->
VLAN
menu, VLANs (virtual LANs) are configured with interfaces that operate
in Bridging mode. Using the
VLAN
menu, you can make all the settings needed for this and
query their status.
12 LAN
Funkwerk Enterprise Communications GmbH
152
R1xxx/R3xxx/R4xxx
