• X.25 PAD: X.25 PAD is used to provide a protocol converter, which converts non-
packet-oriented protocols to packet-oriented communication protocols and vice versa.
Data terminal equipment sending or receiving data on a non-data-packet-oriented basis
can this be adapted in line with Datex-P (public data packet network based on the prin-
ciple of a packet switching exchange).
When a call comes in, your device first uses the entries in this menu to check the type of
call (data or voice call) and the called party number, whereby only part of the called party
number reaches the device, which is forwarded from the local exchange or, if available, the
PBX. The call is then assigned to the corresponding service.
Note
If no entry is specified (ex works state), every incoming ISDN call is accepted by the
ISDN Login service. To avoid this, you should make the necessary entries here. As
soon as an entry exists, the incoming calls not assigned to any entry are forwarded to
the CAPI service.
A list of all MSNs is displayed in the
Physical Interfaces
->
ISDN Ports
->
MSN Configura-
tion
menu.
11.3.2.1 New
Choose the
New
button to edit the MSN's.
The menu
Physical Interfaces
->
ISDN Ports
->
MSN Configuration
->
New
consists of the
following fields:
Fields in the MSN ConfigurationBasic Parameters menu
Field
Description
ISDN Port
Select the ISDN port for which the MSN is to be configured.
Service
Select the service to which a call is to be assigned on the
MSN
below.
Possible values:
•
-3* 4$
(default value): Enables login with
-3* 4$
•
=$"
: Default setting for PPP routing. Contains
automatic detection of the PPP connections stated below ex-
cept
3@;<
.
•
-%
: Enables a number to be defined for IPSec callback.
11 Physical Interfaces
Funkwerk Enterprise Communications GmbH
136
R1xxx/R3xxx/R4xxx
